CNC Coolant Sprayer System V2


New

CNC Coolant Sprayer System V2

Product no.: 596

In stock
can be shipped within 1-2 days

18.00

Incl. VAT., plus delivery

Delivery weight: 260 g


This system can be used with most common coolants and is no fogging the collant, but spraying small doplets. The chance that these droplets reach the tool and the workpiece is much higher, than with other common fog sprayers. The needed amount of coolant is reduced and less coolant vaporizes to the atmosphere. This unit can be controlled via the main valves for air an coolant directly, therefore offering optimal amount, drop sizes and sprayangles for your application. The mixing of air and coolant happens right at the tip of the nozzle.

The cooling unit will decrease the wear on your tools and ensure a higher quality work piece finish. You can also use faster cutting parameters than with dry processing.

  • Length of the outlet ca.: 31cm

    Air Pressure: 5-6 bar (70-90 PSI)

    Mounting hole distance: 21.5mm

    Mounting hole diameter: ca. 4.5 mm for M4 screws

    Coolant flow rate: 2.5ml/min (minimal)

    Coolant flow rate: 575ml/min (maximum at less than <1m static head)

    Bending radius: 6cm

    Air Connector : 8mm

    Coolant Connector: 4mm

Do not breathe in the fumes during and after processing. DO NOT USE ANY FLAMABLE LIQUIDS FOR COOLING. RISK OF EXPLOSION!

Delivery Content: 1 pcs. including all parts seen in the picture

 

Accessories

Product Note Status Price
Flexible Extraction Tube 75mm Flexible Extraction Tube 75mm
(colour: white)
70.00 *
Delivery weight: 2,400 g
Flexible Extraction Tube 75mm Flexible Extraction Tube 75mm
(colour: black)
70.00 * Notify on availability
Delivery weight: 2,400 g
CNC Coolant Sprayer System CNC Coolant Sprayer System
17.00 *
Delivery weight: 200 g
*

Incl. VAT., plus delivery

Display accessory details

Browse these categories as well: Home page - Cubic Print, misc, misc, All